Owner manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 24
Mix Control mode setting
Please according to your aircraft type, through "GCS"--"Param2"--"Mix control" to set mix
control.
No.
Normal
Elevon
V tail
airship
option
No MIX
ELE&AIL MIX
ELE&RUD MIX
No MIX
First you should set the correct mounting direction according to the Panda2 mounting
direction on the plane(The default setting is Arrow forward).Click on the button "Inst Setting" after
you choose the correct mounting direction. After that, pitch and roll inclined the plane through the
attitude Chart to check whether the posture and aircraft state is identical. "Teleme Rata" refers to
the flight control data downlink frequency. "RC Rate" means the remote control frequency when
using the Remote Adaptor. We suggest you use the default value for these two parameters, if you
set the value is too big. it will obstruct the Data radio communication and can not communicate at
all.