Owner manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 16
GPS module installation
 GPS module including a flat-GPS passive antenna. This is a sensitive antenna for GPS
signals, while false signals reflected from the ground is effectively filtered out. Install the
GPS unit horizontally. Keep metal objects and other conductive materials such as carbon
fibre away from the GPS unit. Additionally no transmitting antenna should be around the
GPS antenna. The communication link antenna (Data Radio) or your video transmitter
should be kept as far away from the GPS unit as possible.
 Attention:Panda2 firmware V1.11 and above added support for UBLOX GPS(Four wires,
blue plastic box),If you use our new GPS(Four wires, blue plastic box),please upgrade
Panda2 firmware to V1.11 and above.
Power management module installation
 The power management module is used to connect the power battery and ESC, which
integrates a current sensor, can measure the power current and voltage, the internal
integrated DC-DC module will output a stable voltage which about 5.3V to power on
Panda2 . But the power management module can not power on the servos, The servos
still need through the ESC from S3 port or external power source from P2 port to power
on.