Owner manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 15
Arrow forward（default direction）
Arrow towards to left
Arrow towards to right
Arrow towards to back
Nose of the plane
The installation of main module
PANDAⅡ module installation
 The Autopilot module must be placed horizontally and as close as possible to the plane‘s CG
(Center of Gravity). The default direction is the arrow direction must be pointing towards the
nose of the plane (i.e. direction of flight). You can change the direction to four directions via the
GCS software, i.e direction forward, back, left, right (shown below) .
 When installing the autopilot module please make use of the supplied damper mount or other
DIY vibration damping device, especially on gasoline aircraft. Otherwise the vibrations will
cause a large data inconsistencies which will adversely affect the autopilot accuracy.