Owner manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 8
(2) Stick the solid foam pads (dampers) to the cover board four interior Angle position;
(3) Stick the cover board to the DOS upper surface (LOGO character surface); you can appropriately increase
DOS module weight to improve the damping effect, you can stick copper sheet or other sheet metal which
cannot be magnetized on the bottom of the DOS (Otherwise the magnetized sheet metal will disturb the
internal magnetic field sensors).
(4) Use screws to fix the cover board to the four support columns;
(5) Stick the circular ring foam pads (dampers) to the four rounded corners on the baseboard vibration
absorbing mount.Then fix it as far as possible to the position of barycentre on aircraft