Owner manual

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [e-mail]
Page 12
USB Cable
if you control your aircraft descend to the ground in hovering mode may cause the aircraft altitude volatility
which caused by the ground air.
2) Without the GPS module, switching to Hovering Mode or Auto Return to Launch Mode will automatic bring
you into Fixed Altitude Flight Mode.
(3)In hover mode, you can change the aircraft position by using the RC sticks. When you release the RC
sticks, the aircraft will hover to a new position.
(4)GPS module should be placed as far as possible to the center position, in order to reduce the interference to
GPS data when it level rotating. Also you can put the GPS module to a high place using a stent. This practice
can effectively reduce the interference to GPS signals caused by other devices, and improve the positioning
performance of GPS module.
14. DOS Setting Software and installation and debugging instructions
 Connection Mode:
First need install USB-TTL device driver, you can download it form our website: www.feiyudz.cn
Software Interface Description:( Parameter in the following picture is default parameter)