User Manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
- 5 -
By now, the Baud Rate change has been completed. If you power off the AHRS, then
repower on, the Baud Rate is “115200”.
How to change the Refresh Rate permanently:
For example, change the Refresh Rate to “50HZ”.
Click the “CONFIGURATION” button on the menu, then choose the option “AHRS Output
Refresh Rate”, select “50HZ”.
Choose “Yes”, when the confirmation window is pop-up.
Shown as below:
Click the “Write to AHRS” button, the new Refresh Rate will be written to AHRS
permanently. There is a message shown in the status box if change successfully.