User guide

GuiLin FeiYu Electronic Technology Co., Ltd. http://www.feiyudz.cn E-mail: [e-mail]
Page 12
e) Video Signal In/Out interface：
V-out
V-in
12V
12V
GND
GND
a) V-out：connect to video transmitter
b) V-in： connect to FPV Camera video output
c) 12V： 12 Volt output supply to video transmitter and camera
(make sure your equipment is rated 12 volts!)
d) GND：connect to video transmitter or camera –ve.
e) CS (Current Sensor) interface：
CS
12V
VCC
GND
a) CS : Two pin interface for Current Sensor Data.
b) 12V : Provides + 12V power to FPV Camera and video
Transmitter
c) VCC : Provide +5V power to FY41AP, RC Receiver, GPS
Module & Data Radio
d) GND : Connect to Ground (-ve)