Manual

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
- 22 -
Start Motor and check the Motor rotation direction
Start Motor：When using multi-rotor firmware, pushing throttle stick before
takeoff will not start the motors. You have to execute Combination Stick
Commands (CSC) in stabilized mode (Can not in Hovering mode or Auto Return
To Launch Mode(RTH) ) in order to start motors.(please do not install propeller
yet.)
Meet the following conditions:
 Put Throttle stick to the lowest position
 Put Aileron stick to any endpoint position
 Put Elevator stick to any endpoint position
 Put Rudder stick to any endpoint position
Please slowly push the throttle and according to the picture ―Motor Mixer‖
shows to check the motor rotation direction is right or not.