User guide

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [e-mail]
Page 13
Power manager module install
The airspeed sensor need to pull ahead the front of the pneumatic opening and in the line
with the direction of flight. You can install the Airspeed sensor to the wing or in the front of the
nose, do not block the front of the air inlet , we can use the glue to fix the airspeed sensor. Note:
Make sure that after installation, the fuselage in flight airflow can not interfere with air intakes.
GPS module install
GPS receiver module has integrated plate type GPS passive
antenna with stronger reception ability shielding the false signal by ground reflection efficiently.
DO NOT install next to metal or carbon fiber & other shielding material, which may block
satellite signal reception. Install the GPS Module horizontal and away from electromagnetic
sources such as ESC‘s, power wires, servo wires & video transmitters which can interfere with
GPS signal.
Power manager module install
Power manager module supports 2S～6S lithium battery
input; the integrated current sensor can measure APM draw and voltage; DC-DC module offers
5V to FY-41AP meanwhile 12V to video camera and video transmitter. But servo power is
supplied by ESC or S1~S8 any port access.