User Manual

Photo
Burst
Only display in Photo mode. 3 / 5 / 10 pictures are settable for continuous shooting,
factory default setting is Off.
Press Shutter botton for continuous shooting after setting.
Timelapse
Open the timelapse function and set the internal time for shooting two adjacent photos.
You can choose from 3 sec / 5 sec / 10 sec / 30 sec /1 min / Off.
Factory default setting is Off.
Timelapse Duration Set the shooting time of time-lapse photography.
Level Speed
Open the panning axis rotation function and set the panning axis rotation
speed for time-lapse photography.
The settable numerical range is -20 ← 0 → +20（“+”stands for clockwise rotation,“ -”stands
for anticlockwise rotation），the bigger the number the faster the rotation speed, the maximum
rotation speed is 360°/ 120min, and the minimum is 360°/ 6min.
If the number increases by 1, the time needs for rotating 360° shall decrease by 6 minutes;
if the number decreases by 1, the time needs for rotating 360° shall increase by 6 minutes.
The time needs for rotating 360°between two numbers is as following table (“min” stands for minutes)
There is no rotation when the number is set as 0.
Vertical
Speed
Turn on the tilting axis rotation function to set the tilting axis rotation speed for
time-lapse photography. Please refer to“Level Speed setting”.
Invert
Mode
Invert the screen display after opening.
Can be used for inversion shooting. Factory default setting is “Off”.
Date
Stamp
The shooting date and time shall be displayed on the picture after this function
is opened. Settable options: Off / Date / Date & Time. Factory default setting is Off.
Date & Time Can set the current date, time and format. Turn the joystick to the right to
successively select the date and time format desired to be modified, turn the
joystick up to increase the numerical value while turn it down to decrease the
numerical value. After setting all items, turn the joystick to the right to save the
settings and return to the previous menu.
Language Set the menu to be in English / Simplified Chinese / Traditional Chinese / German /
French / Spanish / Portuguese. The factory default setting is English.
System
WIFI-Password
Set WiFi password.
Format Format SD card
How to use Summon
5
Restore to the factory settingsFactory Reset
Check the capacity and free space of SD card Card Info
System Info
Check information related to the system
1
120
min
114
min
108
min
102
min
96
min
90
min
84
min
78
min
72
min
60
min
66
min
54
min
48
min
42
min
36
min
30
min
24
min
18
min
12
min
6
min
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Number
Time