User Manual

After power off, connect the USB data cable to USB port, and connect
with 5V USB power adapter by USB cable (equipped by user).
Or take out the battery, and use the corresponding charger to charge
the battery (equipped by user).
The red indicator light is on during charging, and green light is on
after the battery is fully charged.
8. Charging mode
5V USB power adapter
(Equipped by user )
10. Operating example
Take time-lapse photography as an example:
9. Initialization
Place Still
In boot-up state, long press for 0.5 second to make the motor
stop working, the indicator light shall flash for three times.
Triple tap function button, place it on a still
surface after the indicator light is on, and keep
it in a static state as shown in the right picture:
Initialization succeeds if the indicator light
restores to flashing for three times.
（1）
（2）
（3）
When the initialization failed, the LED indicator will flash quickly, repeat step (2) & (3) to reinitialize.
Micro port
USB data cable
USB port
（1）Install the battery, long press the function
button for 0.5 second to power on.
（2）Triple tap function button to access the
menu.
Access to the
next menu
or confirm
Turn up to select
Turn down to select
Turn down to select
Return to the
previous menu
or exit
Function
button
How to use Summon
8
Introduction of the joystick
under menu mode
（1）There is small angular deviation between tilting angle and
horizontal line after boot-up.
（2）There is small angular deviation between rolling angle and
horizontal line.
（3）Under lock mode, panning angle drifts.
Initialization steps:
Initialization is required in these cases