Installation Sheet

COLOR CHANGING INSTRUCTIONS
1. You can lock in one color temperature, change among multiple color temperatures, dim
from 10%-100%, memorize the last color temperature, and reset automatically.
2. Soft White - Bright White - Daylight - Light Switch Marks on the lamp: SW-BW-DL-Switch
3. When the slide switch is set to SW (Soft White), the color temperature is set to 3000K.
4. When the slide switch is set to BW (Bright White), the color temperature is set to 4000K.
5. When the slide switch is set to DL (Daylight), the color temperature is set to 5000K.
6. When the slide switch is set to SWITCH, the color temperature can be changed from
SW-BW-DL with your existing light switch.
7. To change color temperatures using your existing light switch:
A. Set the slide switch on the back of the fixture to “SWITCH”
B. Toggle your light switch ON and OFF within 0.5-3 seconds to cycle through the 3
different color temperatures.
C. If the fixture is left ON then turned OFF over 3 seconds. The fixture will remember the
last colortemperature selected and will display that color when turned on again.
8．Reset function is used when using multiple Color Selectable lighting products operating
from the same light switch. In the event multiple fixtures are not displaying the same
color at the same time, fixtures must be RESET using your existing light switch. Toggle
the wall switch ON and OFF seven times leaving it in the ON position within 1 second and
leaving it in OFF position within 1 second. (ex: Fixture in ON position, toggle the wall
switch OFF leaving it OFF within 1 second then ON leaving it ON within 1 second,
Repeating for a total of seven times.)