Installation Sheet

6 WWW.FEIT.COM
Retain this manual for future use.
Color Changing Instructions
1. You can lock in one color temperature, change among
multiple color temperatures, dim from 10%-100%,
memorize the last color temperature, and reset
automatically.
2. Soft White - Bright White - Daylight - Light Switch
Marks on the lamp: SW-BW-DL-Switch
3. When the slide switch is set to SW (Soft White), the
color temperature is set to 3000K.
4. When the slide switch is set to BW (Bright White), the
color temperature is set to 4000K.
5. When the slide switch is set to DL (Daylight), the color
temperature is set to 5000K.
6. When the slide switch is set to SWITCH, the color
temperature can be changed from SW-BW-DL with your
existing light switch.
7. To change color temperatures using your existing light
switch:
A. Set the slide switch on the back of the fixture to “SWITCH”
B. Toggle your light switch ON and OFF within 0.5-3 seconds
to cycle though the 3 different color temperatures.
C. If the fixture is left ON for over 10 seconds then turned
OFF, the fixture will remember the last color temperature
selected and will display that color when turned on again.
8. Reset function is used when using multiple Color Selectable
lighting products operating from the same light switch.
In the event multiple fixtures are not displaying the same
color at the same time, fixtures must be RESET using your
existing light switch. Toggle the wall switch ON and OFF five
times leaving it in the ON position for 5 second intervals. (ex:
Fixture in ON position, toggle the wall switch OFF then ON
leaving it ON for 5 seconds then OFF then ON leaving it ON for
5 seconds Repeating for a total of five times.)