Phau Ntawv Qhia

FEIT ELECTRIC COMPANY | PICO RIVERA, CA | [phone] | FAX [phone] | www.feit.com
Replace with LEDR56/950CA
To order contact FEIT ELECTRIC COMPANY
Tel: [phone]
Http: www.feit.com
Email: [e-mail]
INSTALLATION
& OPERATING
INSTRUCTIONS
REV003
READ & SAVE IMPORTANT SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble,
operate or install this product. This product must be installed in accordance with any
applicable installation code(s) by a qualified electrician or person familiar with the
construction and operation of the product and the hazards involved.
• RISK OF FIRE OR ELECTRIC SHOCK: The electrical rating of this product is 120VAC.
• RISK OF FIRE OR ELECTRIC SHOCK: Install this product only in luminaires that have
the construction features and dimensions shown in the photographs and/or drawings in
this manual.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or
other sharp objects.
• RISK OF SHOCK – DISCONNECT POWER BEFORE INSTALLATION
• Do not make or alter any open holes in an enclosure of wiring or electrical components
during installation.
• THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
• RISK OF FIRE OR ELECTRIC SHOCK: LED Recessed Downlight with Trim installation
requires knowledge of luminaires electrical systems. If not qualified, do not attempt
installation. Contact a qualified electrician.
To avoid possible electrical shock, be sure that the power supply is turned off at the fuse
box or circuit breaker before installing or servicing the product. For your safety, read and
understand the instructions completely before beginning installation.
WARNING
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacture could void the
user's authority to operate the equipment. Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660. www.feit.com.