Model: UCL72/FLEX/5CCT DN ONE SYNC LED LIGHT SYSTEM = FLEXIBLE UNDER CABINET 72” TAPE LIGHT IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Questions, problems, missing parts? Ba fore returning to the store, call Fe it Electric Customer Service 8am. 5pm, PST, Monday Friday 1-866-326-BULB (2852) FORFEIT We appreciate the trust and confidence you have placed in Fe it Electric through the purchase of this Under Cabinet Tape Light.
Table of Contents Table of Contents . . Safely Information . FCC Statement. Warranty... Pr-Assembly LED Fixture Installation. The Tape Light can be Cut and Rejoined Operating Instructions. Pauli POT Safety Information SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS: CAUTION: Do nat attempt io Install while plugged In, This ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL fire is for indoor uss only. Not for use with plastic cabinets. PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.
Pr-Assembly TOOLS REQUIRED 0 ® SCANNER PENCIL SCISSORS HARDWARE INCLUDED A NOTE: Hardware not shown to actual size. y. 5. Part | Description Quantity AA LED Tape Light & Controller Cable 1 CC 18in. Linking Cable 2 DD Mounting Screws 1 EE 6in.
LED Fixture installation 1 Position the Fixture Find the desired place for the fixture and mark clearly using the provided mounting template (FF). yd ir 2 Installing the Mounting Screws Screw In the Mounting Screws (DD) on the marked locations. 4 Cutting the Tape Light Cut the Tape Light (AA) to the desired length at marked areas. QQ Qe 5 Mounting the Tape Light Remove the adhesive backing paper to expose the adhesive (see Fig.1) and fix the Tape Light (AA) to the desired position.
LED Fixture Installation (continued) 6 Connecting the Power Supply Plug In the power cord to the fixture. Connecting to a Power Outlet Connect the Electrical Plug (BB) to the power outlet on the wall. 0) i) 8 Connecting Linking Cable Plug in Controller to other One Sync products using Linking Cable (CC). ONE SYNC product (not included) CC a The Tape Light can be Cut and Rejoined 1 Removing the Heat-Shrink Remove 1cm of heat-shrink covering the connection points and install the linking cable (CC) (see Fig.
Operating Instructions ON/OFF Button CCT Button Dim Button Use the Dim Button to Change the Dimming Levels [1 To select the desired dimming level, cycle through the dimming levels (High, Medium, Low, Dim, Off) by pressing the Dim Button. This setting will be fixed each time the ON/OFF switch Is muted ON. Changing the Color Temperature Setting [1] To select the desired color temperature, cycle through 2700K 3000K 3500K 400K 5000K by pressing the CCT Button.
