Installation Guide

PAGE 1
MODEL SHOP/4/H0/850 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY LED SHOP LIGHT INSTALLATION INSTRUCTIONS WARNING: These products may represent a possible shock or fire hazard if Improperly installed or attached In any way. Products should be # installed In accordance with the owners manual, current electrical codes and/or the current National Electric Code (NECK.
PAGE 2
ECLECTIC TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE IN ORDER TO PREVENT POSSIBLE ELECTRIC SHOCK INSTALLATION OPTIONS Install fixture using included chain and V-hooks 1. Install provided saw-hooks directly onto ceiling. Spacing between saws should be 47.28 inches {See Figure A). For concrete ceilings/drywalls, wall anchors are required. Drill two holes (use a 1/4 inch drill bit for provided wall anchors then use provided screw hooks (See Figure 1). 2.