Installation Instructions

4 WWW.FEIT.COM
Retain this manual for future use.
5-6 in. Recessed Can Installation
5
Installing the fixture
□ Insert the torsion springs into the fixture housing brackets.
□ When installing trim into a 5 in. recessed housing, the torsion
spring (FF) must be moved. Unscrew the torsion spring (FF) from
the 6 in. position and move it to the 5 in. position. (Fig. 3)
□ Gently push the fixture into the recessed housing. (Fig. 4)
1
Turning Off the Power
□ Turn the power OFF at the switch and
fusebox or the circuit breaker.
□ Remove the existing trim installed in the
recessed housing.
□ Install the E26 adapter (DD) into the socket. (Fig. 1)
2
Installing the adapter
□ Connect the two terminals together. (Fig. 2)
3
Connecting the terminals
4
Adjusting the torsion springs
Connect the orange connectors
5”
6”
Move the torsion spring from the 6 in.
position to the 5 in. position
FF
Fig. 2
Fig. 3
Fig. 4
Fig. 1