ITEM # LEDREXT/HO/NL/SCCTCA Questions, problems, missing parts? Before resuming to the store, call Fe it Electric Customer Service 8am. -5p.m, PST, Monday-Friday 1-866-326-BULB (2852) IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or Install this product.
PACKAGE CONTENTS Before beginning installation of this product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate this product. COMPONENTS INCLUDED (1) POWER SUPPLY BOX (1) RECESSED DOWNRIGHT (3) TERMINAL BLOCK CONNECTORS (1) INSTRUCTION MANUAL (2) SCREWS (M4*25mm) moo wk PRODUCT ELECTRICAL RATINGS 120 17W SUITABLE FOR DAMP LOCATIONS.
HOW TO SELECT YOUR LIGHT COLOR OR NIGHTLIGHT This product comes with a dual feature that allows you to select between downright mode and nightlight mode. + Downright mode provides a selection of five color temperatures. «+ Nightlight mode provides low light output at a soft color temperature.
PER-INSTALLATION REVIEW + Turn the power OFF from the breaker panel before starting installation. + Locate a suitable location for the fixture and cut the correctly sized hole in the drywall or ceiling tile (for a suspended T-Bar type ceiling) — refer to Hole Cut Out Template for appropriate size. + Know the location of your joist before making any cuts. + Run electrical wire from the switch (power supply) through the mounting hole; use NM cable or Flexible Metal Conduit Cable.
CUT OUT TEMPLATE Fora 6 1/2 in. hole.
