Use and Care Guide
4
Confirm Pairing
Power On the bulb(s) and make sure
the light(s) are blinking,
then tap
Confirm.
SMART BULB SETUP
Add Device
Add Lighting Device
Make sure you are connected to
a 2.4GHz Wi-Fi Network, then tap
Lighting, then tap Lighting device.
Tap + in the upper right corner
NOTE: If this is the first device you
are setting up, you can also
select Add Device.
IMPORTANT!
Install and Power On
your Smart Bulb(s) before proceeding.
Not Compatible with 5G Wi-Fi Networks
NOTE: If the bulbs are not blinking,
turn bulbs ON-OFF-ON-OFF-ON.
123
112
1