aka ECLECTIC ITEM # LEDRS6HOJBX/EWYCA Questions, problems, missing parts? Before resuming to the store, call Fe it Electric Customer Service 8am. -5p.m, PST, Monday-Friday 1-866-326-BULB (2852) IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or Install this product.
|. E CONTENTS Before beginning installation of this product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate this product. COMPONENTS INCLUDED (1) LED DOWNRIGHT {1) INSTRUCTION MANUAL (1) CUT-OUT TEMPLATE (3) TERMINAL BLOCK CONNECTORS gow >» PRODUCT ELECTRICAL RATINGS 120 SUITABLE FOR WET LOCATIONS.
HOW TO SELECT YOUR LIGHT COLOR Bright White 3000K Neutral White 2700K 3500K Cool White 4000K Daylight 5000K hm > NOTICE: The toggle switch is located on the back of the future. PICK YOUR FAVORITE LIGHT COLOR BEFORE INSTALLING » You can lock in one color temperature or change among multiple color temperatures, it will memorize the last color temperature and reset automatically. » When the slide switch is set to SW (Soft White), the color temperature is set at 2700K.
PER-INSTALLATION REVIEW + Turn the power OFF from the breaker panel before starting installation. + Locate a suitable location for the fixture and cut the correctly sized hole in the drywall or ceiling tile (for a suspended T-Bar type ceiling) — refer to Hole Cut Out Template for appropriate size. + Know the location of your joist before making any cuts. + Run electrical wire from the switch (power supply) through the mounting hole; use NM cable or Flexible Metal Conduit Cable.
CUT OUT TEMPLATE Fora 6 1/2 in. hole.
