batik To order contact FAT ELECTRIC COMPANY Lb@t" la Tel: 562-463-2852 Pith: www forfeit Email: INSTALLATION & OPERATING INSTRUCTIONS L AR R TSI READ ALL INSTRUCTIONS BEFORE INSTALLATION This fixture operates on regular household power (120V, 60Hz). This fixture needs to be grounded. Disconnect power at your breaker panel before starting installation of this downright GENERAL INSTRUCTIONS Electrical connections must be made in accordance WARRANTY B " .
INSTALLATION INSTRUCTIONS FOR RECESSED HOUSING Tools Required — Screw driver — Dry wall saw — Scissors DISCONNECT POWER AT YOUR BREAKER PANEL BEFORE STARTING INSTALLATION OF THIS FIXTURE Ensure space above the installed fixture is at least 2.375 in. [ 2875in 0 Cut a hole in the ceiling using the template provided. Refer to the table below for cut out dimension. NOTE: Before cutting, ensure that the hole does not impinge on joists, pipe quark, cable or other building services.
fl Replace junction box cover. fl Hold spring clips against fixture and gently guide into the ceiling until clips snap into place. Fixture should be flush against ceiling. = Restore power at the breaker pane! and enjoy your new LED panel light. NOTE: These LED panel lights can be used with most incandescent dimmers. Dilemma lights will operate smoothly with most residential dimmers and provide continuous dimming from 100% brightness to a low of 10% of original light density.