Installation Instructions

INSTALLATION INTO EXISTING RECESSED FIXTURE
NOTE: For use with 4 in. recessed housings (housing sold separately)
1
Turn off the power at the switch and
fuse box or circuit breaker.
2
Remove the existing trim installed in the
recessed housing (if necessary).
3
Install the medium base adapter into the
socket.
5
Squeeze the clips in and gently push the
product into place.
6
Gently push the product in until it is flush
to the ceiling.
4
Connect the two terminals together.
4
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | 1-866-326-BULB (2852) | FAX [phone] | www.feit.com