Installation Instructions

3
HOW TO SELECT YOUR LIGHT COLOR
NOTICE:
2700K
Soft White
3000K
Bright White
3500K
Neutral White
4000K
Cool White
5000K
Daylight
Light Switch
(SWITCH)
• You can lock in one color temperature or change
among multiple color temperatures, it will
memorize the last color temperature and reset
automatically.
• When the slide switch is set to SW (Soft White),
the color temperature is set at 2700K.
• When the slide switch is set to BW (Bright
White), the color temperature is set at 3000K.
• When the slide switch is set to NW (Neutral
White), the color temperature is set at 3500K.
• When the slide switch is set to CW (Cool White),
the color temperature is set at 4000K.
• When the slide switch is set to DL (Daylight), the
color temperature is set at 5000K.
• Set the slide switch on the back of the fixture
to SWITCH.
• Toggle your light switch ON and OFF within
0.5-2 seconds to cycle through the five
different color temperatures.
• If the fixture is left OFF for over 10 seconds
then turned ON, the fixture remembers the last
color temperature selected and displays that
color when turned on again.
• The reset function is used when using multiple
Color Selectable lighting products operating
from the same light switch. In the event that
multiple fixtures are not displaying the same
color at the same time, the fixtures must be
RESET using your existing light switch. Simply
toggle the wall switch ON and OFF 7 times,
leaving it in the ON position for 1 second
intervals. (Ex: With the fixture in the ON
position, toggle the wall switch OFF then ON,
leaving it ON for 1 second, then OFF then ON,
leaving it ON for 1 second. (Repeat 7 times.)
PICK YOUR FAVORITE LIGHT COLOR
BEFORE INSTALLING
ADJUST YOUR LIGHT COLOR ANYTIME
WITH A REGULAR WALL LIGHT SWITCH
The toggle switch is located on the power supply box.
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | 1-866-326-BULB (2852) | FAX (562) 908-6360 | www.feit.com