ITEM # LEDR4/NLISCCTCA IMPORTANT SAFETY Questions, problems, missing parts? | N STREW Before resuming to the store, call Fe it Electric Customer Service 8am. -5 p.m, PST, Monday-Friday 1-866-326-BULB (2852) INSTALLATION GUIDE READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install this product.
PACKAGE CONTENTS Before beginning installation of this product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate this product. COMPONENTS INCLUDED MEDIUM BASE ADAPTER B | (1) RECESSED DOWNRIGHT C | (1) INSTRUCTION MANUAL B . ALJ PRODUCT ELECTRICAL RATINGS 120 V/60 Hz, XX mA, 7.2W SUITABLE FOR DAMP LOCATIONS Suitable for Type IC Housings and Non-IX Housings.
HOW TO SELECT YOUR LIGHT COLOR OR NIGHTLIGHT This product comes with a dual feature that allows you to select between downright mode and nightlight mode. + Downright mode provides a selection of five color temperatures. «+ Nightlight mode provides low light output at a soft color temperature.
INSTALLATION INTO EXISTING RECESSED FIXTURE NOTE: For use with 4 in. recessed housings (housing sold separately) Turn off the power at the switch and Squeeze the clips in and gently push the fuse box or circuit breaker. product into place. Remove the existing trim installed in the recessed housing (if necessary). Install the medium base adapter into the socket. A NOTE: Saint profaned light carol before installing. Aa Connect the two terminals together.
