Full Product Manual

FEIT ELECTRIC COMPANY | PICO RIVERA, CA | [phone] | FAX [phone] | www.feit.com
7.09 in.
Recommended screw dimensions: Head: 0.27~0.34 in., Screw: 0.16~0.17 in.
Mounting holes
12 in. Brackets and Screws Installation (2 grow lights or more)
1
2
Install the 12 in. brackets on to the xture end caps. The male and female ends
should be alternated.
3
Use the above assembly as a template. Place against the ceiling and mark
mounting holes
4
Drill holes for screws at marked locations. Attach the assembly to the ceiling
using four (4) mounting screws.
5
Install the 5 ft. power cord into the outlet of the rst grow light’s end cap. Use
6 in. linkable cables to connect all grow lights.
6
Plug in the power cord to the outlet.
Female
Male
ENSURE THE FIXTURE IS NOT PLUGGED IN TO THE ELECTRICAL POWER.