Full Product Manual

FEIT ELECTRIC COMPANY | PICO RIVERA, CA | [phone] | FAX [phone] | www.feit.com
screw screw
1 1
D=0.1 in.
screw screw
22.6 in.
2
Recommended screw dimensions: Head: 0.27~0.34 in., Screw: 0.16~0.17 in.
6 in. Hanging Cable Installation
Fixture Flushmount Screw Installation
1
1
2
Install two screws on the mounting surface. The spacing between the screws should be 22.6 in. The spacing
between the screw head and the mounting surface should be 0.1 in.
3
2
Attach two hanging hooks to the ceiling. The spacing between the hanging
hooks should be 22.1 in.
Ceiling
22.1 in.
ENSURE THE FIXTURE IS NOT PLUGGED IN TO THE ELECTRICAL POWER.
ENSURE THE FIXTURE IS NOT PLUGGED IN TO THE ELECTRICAL POWER.
5
Hang the hanging cables onto the hanging hooks.
6
Plug in the power cord to the outlet and plug the other end to the
xture. Make sure to switch the xture on.
3
Install the cable clips into the slotted holes on the end caps of the xture.
Make the cable clips snap on.
7
Use a zip tie to attach the power cord to the hanging cable.
4
Slide the 6 in. hanging cables into the cable clips.
Ceiling
Ceiling
Zip tie
Lift the xture up to the screws and slide to one side to secure the xture into place. The xture should be rmly xed
against the screws. Plug in the power cord to the outlet and plug other end to the xture. Make sure to switch the xture on.