Full Product Manual

6
Ways to Grow (continued)
Place the water tray (GG) on the base (DD).
1
Fill the water tray (GG) with water. Distilled or filtered water
is preferred.
2
Add the liquid nutrients according to the food bottle instructions.
3
Place the water tray (GG) on the base (DD).
1
Place the soil tray (FF) on the water tray (GG).
2
Place the peat pellets into each opening of the
top hole tray (EE).
3
Place good soil around the peat pellets and fill the soil tray (FF)
to the top with applicable soil.
4
Use the top hole tray (EE) to hold the pellets, water the pellets
and to keep moisture inside the soil.
5
Press seeds into the top of the peat pellets according to the seed
pack instructions.
6
Use the seedling light setting.
7
Keep the seeds moist by watering every few days until the seeds
break the surface.
8
Use the top hole tray (EE) to locate the pods.
4
5
Use the seedling light setting until the plants have two sets of leaves.
Then switch to the vegetation light setting.
6
The water should be circulated daily to keep the nutrients dissolved.
7
Check the water level frequently.
8
Add liquid plant food every two weeks or as directed by instructions.
9
Seedling light should be used
until 2 sets of leaves have
formed above the surface.
Water level
Aerogarden
®
Pods
Hydroponic Growing Using
Grow Pods
Planting Seeds with
Peat Pellets and Soil
Place the pods in the holes of the top
hole tray (EE). Not all 10 positions
need to be filled.
Aerogarden
®
Pods
Aerogarden
®
is a trademark of AeroGrow International, Inc
EE
DD
GG
Dried pellet Hydrated pellet
Soil level
Peat pellets
- The water tray (GG) will catch the
excess water. Let this water evaporate
or remove the water by unscrewing the drain
plug underneath the water tray (GG).
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
EE
FF
GG
DD