MSDS

MATERIAL SAFETY DATA SHEET
LED LAMP SPECIFICATION
Feit Electric brand led Lamps, manufactured by FEIT ELCTRIC COMPANY, INC., are exempted from the
requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) because they are “articles.”
The following information is provided by FEIT ELCTRIC has a courtesy to its customers.
--------------------------------------------------------------------------------------------------------------------
I. PRODUCT IDENTIFICATION
--------------------------------------------------------------------------------------------------------------------
Trade Name (as labeled):
Feit Electric LED, Eternalite, Party Bulb, LED Night Light.
This data sheet covers all of the following types unless otherwise
indicated: LED Night Lights, LED Party Bulb, LED Night Light
replacement bulbs, Performance LED, Accent LED, Any
“articles” containing LED bulbs
Manufacturer:
FEIT ELECTRIC COMPANY, INC.
4901 Gregg Rd
Pico Rivera, CA 90660
[phone]
--------------------------------------------------------------------------------------------------------------------
II. HAZARDOUS INGREDIENTS
--------------------------------------------------------------------------------------------------------------------
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE
INTACT.
Lamp Assembly – Glass and Metal – The glass is made from soda lime similar to that used
throughout the glass industry for other common consumer items. The metals for the adapters and
LEDs are generally made from various amounts of aluminum, tin, lead, copper, zinc, and nickel.
None of these materials would present a potential hazard in the event of breakage of the lamp, aside
from the hazard due to broken glass.
Phosphor in LEDs – (nuisance dust) phosphate mix using manganese, rare earth elements such as
lanthanum, and yttrium as either an oxide or as a phosphate, along with a barium/aluminum oxide all
are tightly bound in the phosphor matrix. These phosphors produce better lamp efficiency and color
rendition. The phosphor components may vary slightly depending on the color of the lamp. Some
lamps may contain a thin coating of tin oxide inside the glass.
LEDs – The LEDs consist of metal and InGaN (Indium Gallium Nitride) semiconductor chip. Due to
their insolubility and inertness, these materials do not present a significant hazard.
--------------------------------------------------------------------------------------------------------------------
III. PHYSICAL PROPERTIES
--------------------------------------------------------------------------------------------------------------------
Not applicable to intact lamp.
--------------------------------------------------------------------------------------------------------------------
IV. FIRE & EXPLOSION HAZARDS
--------------------------------------------------------------------------------------------------------------------
Not applicable to intact lamp