Instructions / Assembly

(E) 4/06

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before

assembly. Bulb not included.

1.  Install threaded stud by screwing into the half cap  

 nut. Insert other end of the threaded stud through  

 hole located at bottom of fixture. Then slide font  

 from below and lock all together by fastening with a 

 small finial.

2. Install large finial by screwing onto top of fixture.

3. Follow enclosed supplement installation instructions 

 for electrical and fixture installation onto house  

 outlet box. If you do not have an outlet box at  

 desired location to attach the fixture than hire a  

 qualified electrician to create one.

4.  Install fabric shades and bulbs:

 A. Install fabric shade onto harps by fastening with 

 small finials.

B. Install candle tubes by slipping onto sockets.

C. Install harps by slipping on top of candle tubes.

D. Install bulbs (not included) onto sockets through 

 bottom opening of fabric shades. Use type-B of 60 

 Watt maximum candelabra base bulbs.

Half

Cap Nut

ASSEMBLY INSTRUCTIONS FOR WB1289

Threaded

Stud

Finial

Bulb

(not included)

Small Finial

Large Finial

Fabric Shade

Harp

Candle Tube

Socket

Ball Cap Nuts

Font