Manual

1312
Généralités
Le pistolet à air Modèle P40/P40 Basic est un
pistolet de précision pour le tir sportif. Le Modèle
P40/P40 Basic se distingue par
· la technique parfaite
· le développement du coup court
· l’énergie constante
· la meilleure précision de tir
· coup presque sans recul
Les illustrations dans ces instructions montrent
la version Mod. P40 pour des tireurs droitiers,
avec long cylindre à air comprimé. La version
avec poignée gaucher est identique en ce qui
concerne la manipulation et l’utilisation.
Le pistolet à air FEINWERKBAU Mod. P40/P40
Basic est un pistolet à un coup pour des plombs
en cal. 4,5 mm/.177.
Les instructions sont conformément valables
pour le Mod. P40 Basic. Les différences indivi-
duelles de maniement sont indiquées
séparément.
Le modèle P40 a une poignée en bois contre-
plaqué. Le cran de mire est réglable à l’arrière.
Le modèle P40 Basic est seulement livré avec
un cylindre à air comprimé et le cran de mire
n’est pas réglable en longueur. Les barres de
poids et les trous de canon ne s’appliquent pas.
La poignée est en noyer.
La livraison standard du pistolet à air Mod. P40/
P40 Basic comprend un absorbeur, lequel réduit
l’impulsion du coup.
La propulsion est l’air comprimé. L’air comprimé
se trouve dans le cylindre à air comprimé
détachable et rechargeable au-dessous du
canon. Le cylindre à air-comprimé ne doit être
rempli qu’avec l’air comprimé. Pour la livraison,
les cylindres sont vides et sont donc à remplir
avant de commencer à tirer.
En armant et en chargeant le chargeur est
retirée jusqu’à l’arrêt, en même temps le
percuteur chargé, lequel en faisant partir le coup
dégage une partie de l’air dans le chambre
intermédiaire, et l’absorbeur est rapporté à sa
position initiale. Insérer le plomb dans le
chargeur ouvert, fermer le chargeur, le pistolet
est prêt pour le tir. Attention à la position de la
cheville du “tir à vide”.
Le cylindre à air comprimé peut être dévissé du
pistolet en cas qu’il n’est pas utilisé durant un
certain temps (environ 4 - 6 semaines).
Certaines pertes de pression sont possibles si
le cylindre reste vissé pendant une période plus
longue.
General
The air pistol Model P40/P40 Basic is a precision
pistol for target shooting. The Model P40/P40 Basic
stands for
· perfect construction
· fast shot development
· constant energy
· best shooting precision and
· nearly recoilless firing
The illustrations in this manual show the Model
P40 in the right handed version with long
compressed-air cylinder. The version with left
handed grip is identical as to handling and
operation.
The FEINWERKBAU air pistol Model P40/P40
Basic is a single shot air pistol for pellets in caliber
4.5 mm/.177.
The manual is accordingly applicable to Model P40
Basic. Differences of handling are described
separately when applicable.
Model P40 is equipped with a laminated wood grip.
The rear-sight may be adjusted to the rear.
Model P40 Basic is only delivered with one
compressed-air cylinder and the rear-sight is not
adjustable in length. No rods for weights are by-
packed and there are no barrel perforations. The
grip is made of walnut.
Generally the FEINWERKBAU air pistol Model
P40/P40 Basic is equipped with an inte-grated
absorber, thus reducing the impulse generated by
the pellet.
The propelling charge is compressed-air. The
compressed air is filled in a refillable air cylinder
which may be unscrewed and is placed underneath
the barrel. The compressed-air cylinder must only
be charged with com-pressed-air. For shipping the
compressed-air cylinders are emptied and have
to be filled before use.
During cocking and loading the flap of the loading
aperture has to be pulled rearward to its stop.
Simultaneously the firing piece is being cocked,
which will release a portion of compressed-air in
the intermediate chamber when disengaged, and
the absorber is also brought to its initial position.
Place the pellet in the opened loading aperture,
close flap, the air pistol is ready for firing. Pay
attention to the position of the catch bolt of the dry
firing device.
The compressed air cylinder can be unscrewed
from the air-pistol, if it is not used over a longer
period of time (approx. 4 - 6 weeks). Over a longer
period of time pressure loss may occur, if the
compressed air-cylinder is attached to the air-pistol.
Allgemeines
Die Feinwerkbau-Luftpistolen Mod. P40/P40 Basic
sind Präzisionspistolen für das sportliche
Schießen. Die Modelle P40/P40 Basic zeich-
nen sich aus durch
· ausgereifte Technik
· kurze Schußentwicklungszeit
· konstante Energie
· beste Schußpräzision
· weitestgehend erschütterungsfreien
Schußabgang.
In den Bildern dieser Anleitung ist das Modell
P40 in der Ausführung für Rechtsschützen dar-
gestellt mit langem Preßluftbehälter. Die Aus-
führung mit Griffschalen für Linksschützen ist
in der Handhabung und Bedienung identisch.
Die Feinwerkbau-Luftpistolen Mod. P40/P40 Basic
sind Einzellader für Diabolos im Kaliber 4.5 mm/
.177.
Die Bedienungsanleitung gilt entsprechend für
das Modell P40 Basic. Auf Unterschiede in der
Handhabung wird jeweils getrennt hingewiesen.
Das Modell P40 ist mit einem Schichtholzgriff
ausgestattet. Die Kimme kann nach hinten ver-
stellt werden.
Das Modell P40 Basic wird ausgeliefert mit nur
einem Preßluftbehälter und die Kimme ist nicht
längsverstellbar. Die Gewichtsstangen und die
Laufbohrungen entfallen. Der Griff ist aus Nuß-
baum.
Serienmäßig sind die Luftpistolen Modell P40/
P40 Basic mit einem Absorber ausgestattet, der
den Geschoßimpuls reduziert.
Das Antriebsmittel ist Preßluft. Die Preßluft be-
findet sich in dem abnehm- und nachfüllbaren
Preßluftbehälter unterhalb des Laufes. Der
Preßluftbehälter darf nur mit Preßluft befüllt wer-
den. Bei Auslieferung sind die Preßluftbehälter
ungefüllt und müssen vor Inbetriebnahme ge-
füllt werden.
Beim Spannen und Laden wird die Ladeklappe
bis zum Anschlag zurückgezogen, gleichzeitig
das Schlagstück gespannt, das beim Auslösen
einen Teil der Preßluft in der Zwischenkammer
freisetzt, und der Absorber in Ausgangsposition
gebracht. Diabolo in die geöffnete Lademulde
einlegen, Ladeklappe schließen, Waffe ist
schußbereit. Auf Stellung des Fangbolzens der
Trockentrainingseinrichtung achten.
Der Preßluftbehälter kann, wenn die Luftpistole
längere Zeit nicht gebraucht wird (ca.4 - 6 Wo-
chen), von der Waffe abgeschraubt werden. Ge-
wisse Druckverluste über einen längeren Zeit-
raum, wenn der Preßluftbehälter angeschraubt
bleibt, sind möglich.