Test report no. 21012267 EUT: MRU102 FCC ID: PJMMRU102A FCC Title 47 CFR Part 15 Date of issue: 2021-06-24 Annex acc. to FCC Title 47 CFR Part 15 relating to Feig Electronic GmbH MRU102 Annex no. 5 User Manual Functional Description Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators ANSI C63.4-2014 ANSI C63.10-2013 Date: 2019-11-20 Created: Trepper Controlled: Ftouhi TÜV NORD Hochfrequenztechnik GmbH & Co. KG LESKANPARK, Gebäude 10, Waltherstr.
Test report no. 21012267 EUT: MRU102 FCC ID: PJMMRU102A FCC Title 47 CFR Part 15 Date of issue: 2021-06-24 User Manual / Functional Description of the test equipment (EUT) Date: 2019-11-20 Created: Trepper Controlled: Ftouhi TÜV NORD Hochfrequenztechnik GmbH & Co. KG LESKANPARK, Gebäude 10, Waltherstr. 49-51, 51069 Köln, Germany Released: Hittig-Rademacher Vers. no. 3.19 Tel.
IDENTIFICATION === Ende der Liste für T extmar ke Dec kbl att === INSTALLATION MANUAL ID ISC.MRMU102-A / ID ISC.
IDENTIFICATION ID ISC.MRMU102 Note Note © Copyright by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority.
IDENTIFICATION ID ISC.MRMU102 Content Contents 1 Safety Instructions 5 2 Performance Features of the Reader 6 2.1 Available Reader Types .................................................................................................... 6 3 Assembly and Wiring 3.1 Viewing and Dimensions .................................................................................................. 7 7 3.1.1 Viewing and Dimensions ID ISC.MRMU102-A .......................................................
IDENTIFICATION ID ISC.MRMU102 7 Technical Data 21 8 ANHANG 22 8.1 ANNEX A - Accessories ..................................................................................................
IDENTIFICATION ID ISC.MRMU102 1 Safety Instructions ► The device may only be used for the intended purpose designed by for the manufacturer. ► The operation manual should be conveniently kept available at all times for each user. ► Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer.
IDENTIFICATION ID ISC.MRMU102 2 Performance Features of the Reader The reader modules ID ISC.MRMU102-A and ID ISC.MRMU102-POE are designed for reading of passive data carriers, so-called „Smart Labels“ at an operating frequency in the UHF band between 860 MHz and 960 MHz. Transponders according to EPC Class1 Gen2 are supported. Optional an Upgrade Code for the reading of ISO 18000-6-C transponders is available. For Host communication ID ISC.
IDENTIFICATION ID ISC.MRMU102 3 Assembly and Wiring The reader has been designed for mounting in other equipment. NOTE: Before any installation the intended position of the reader should be tested for its suitability. 3.1 Viewing and Dimensions 3.1.1 Viewing and Dimensions ID ISC.MRMU102-A Figure 1: Dimensions ID ISC.
IDENTIFICATION ID ISC.MRMU102 3.1.2 Viewing and Dimensions ID ISC.MRMU102-POE Figure 2: Dimensions ID ISC.
IDENTIFICATION ID ISC.MRMU102 4 Connections 4.1 Connections ID ISC.MRMU102-A The module version of the reader is equipped with an asynchronous RS232 Interface (X2) and a USB Interface (X3). The Table below shows which connector can be used for the different interface cable. Table 2: Connectors Connector ANT 1-3 ANT 4 X1 X2 X3 Description External Antenna ANT 1 - 3 Internal Antenna ANT 4 Power Supply via Connector X1 RS232 Interface on Connector X2 USB Interface on Connector X3 4.1.
IDENTIFICATION ID ISC.MRMU102 For connection of the power supply a special DC-Connector from the manufacturer Molex is required. The necessary components of the DC-Connector are listed in Table 3. Table 3: Components of the required DC-Connector Component Manufacturer Article ID of Manufacturer Housing Molex 22-01-3027 Crimp Contact Molex 08-50-0114 CAUTION: • Each reader has to be supplied by a separate external power supply.
IDENTIFICATION ID ISC.MRMU102 Interface parameter can be configured via software protocol (e.g. ISOStart). Further information can be found in the System Manual H10410-Xe-ID-B.pdf of the reader.
IDENTIFICATION ID ISC.MRMU102 4.1.3 USB Interface on Connector X3 There is a USB-socket X3 on board for the connection of the USB-Interface. The pinout is standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used. Figure 4: USB interface for host communication NOTE: • • The length of the USB-cable can be a max. of 5 meter.
IDENTIFICATION 4.2 ID ISC.MRMU102 Connections ID ISC.MRMU102-POE The module version of the reader is equipped with an Ethernet Interface (X4). For transponder communication up to 3 external antennas can be connected. In addition an integrated antenna is available. The Table below shows which connector can be used for the different interface cable.
IDENTIFICATION ID ISC.MRMU102 X4 Figure 5: LAN and PoE connection NOTE: The reader has to be supplied by a limited power supply according EN 62368-1 Chapter Q.1, or with a NEC Class 2/LPS certified power supply. It must be ensured that the reader is supplied with 42,5 V DC (48 V DC – cable losses) at least. The maximum cable distance for Ethernet is 100m. It is recommended to use a shielded twisted pair STP CAT5 cable. * For detailed technical information regarding the 802.
IDENTIFICATION ID ISC.MRMU102 The prerequisite for using TCP/IP protocol is that each device has a unique address on the network. All Readers have a factory set IP address. Interface parameter can be configured via software protocol (e.g. ISOStart). Table 9: Standard factory configuration of the Ethernet connection Network IP-Address Subnet-Mask Address 192.168.10.10 255.255.0.0 Port DHCP 10001 OFF NOTE: The reader provides a DHCP able TCP/IP interface.
IDENTIFICATION 4.3 ID ISC.MRMU102 Antenna Terminals 4.3.1 External Antenna ANT 1 - 3 Three SMA sockets are provided on the circuit board for connecting of the external antennas. The maximum tightening torque for the SMA socket is 0.45 Nm. CAUTION: Higher tightening torque will damage the connector.
IDENTIFICATION ID ISC.MRMU102 5 Control and Display Elements 5.1 LED The Reader’s LED can be configured through software. The following Table 11: Default Configuration of the LEDs shows the default setting. Table 11: Default Configuration of the LEDs Abbreviation LED green LED red Description "RUN " Turns on when the Reader is ready „LABEL“ Turns on when a transponder is detected.
IDENTIFICATION ID ISC.MRMU102 6 Approvals 6.1 Declaration of Conformity (CE) Hereby FEIG ELECTRONIC GmbH declares that the radio equipment type ID ISC.MRMU102 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.feig.
IDENTIFICATION 6.2 ID ISC.MRMU102 USA (FCC) and Canada (IC) Product name: ID ISC.MRMU102-A ID ISC.MRMU102-POE Reader name: ID ISC.MRMU102-A ID ISC.MRMU102-POE PJMMRU102A 6633A-MRU102A FCC ID: IC: Notice for USA and Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions.
IDENTIFICATION ID ISC.MRMU102 6.2.2 Installation with FCC / IC Approval FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio Standards in Canada, the system must be professionally installed to ensure compliance with the Part 15 certification / IC certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States / Canada. 6.2.
IDENTIFICATION ID ISC.MRMU102 7 Technical Data Mechanical Data Weight 60 g Dimensions (W x H x D) Electrical Data Power supply • MRMU102-A • MRMU102-POE 137 mm x 77 mm x 17 mm 12 V DC to 24 V DC 12 V DC to 24 V DC Power over Ethernet (POE) Power consumption max. 7 W Antenna Connection Operating frequency 3 x SMA female(50Ω) 1 x integrated Antenna (ANT4) 860 MHz to 960 MHz RF transmitting power max.
IDENTIFICATION ID ISC.MRMU102 8 ANHANG 8.1 ANNEX A - Accessories The following accessories are available for the Reader. Table 12: Accessories Article No. Part No. Description 1686.000.00 1690.000.00 ID CAB.USB-A ID CAB.RS-A 1688.002.00 ID NET.12V-B-EU USB-cable 2,5m Serial data cable Power Supply 95 - 265V AC Input Voltage, (Continental European Plug), with angular DC Plug 2,5mm*5,5mm Output: 12 V DC/ ; 700mA Ambient Operating Temperature: 0°C to +40°C ID NET.
IDENTIFICATION ID ISC.MRMU102 5241.001.00 ID ANT.C2-B Antenna Cable 2m UHF Antenna Cable SMA/TNC 2 m for antennas ID ANT.U580/290 and ID ANT.U290/290 5241.002.00 ID ANT.C6-B Antenna Cable 6m UHF Antenna Cable SMA/TNC 6 m for antennas ID ANT.U580/290 and ID ANT.
IDENTIFICATION ID ANT.U290/290 / ID ANT.U580/290 Robust UHF RFID Antennas - Circular polarization for optimized reading performance - IP65 for outdoor applications - Robust and high-quality design ID ANT.U290/290 - TNC connectors - VESA connection - Secondary safety (optional) - ID ANT.U580/290: 30° beam width, particularly suitable for vehicle identification and Free Flow Tolling systems ID ANT.
UHF Long Range Antennas for various applications UHF RAIN antennas from FEIG ELECTRONIC offer greatest possible variability with elegant design and robust appearance. Product details UHF Antennas Dimensions ID ANT.U290/290 ID ANT.U580/290 288 mm x 288 mm x 65 mm* 576 mm x 288 mm x 80 mm* PC / Aluminium Housing RAL 7015 / Aluminium Colour 1550 g Weight 3850 g IP65 Protection class Gain approx. 9 dBic approx.
Ú UHF RFID Antennas ID ISC.ANT.U170/170 / U270/270 / U600/270 SPECIAL FEATURES Ú Circular Polarization for optimized reading performance Ú Available for EU and FCC Frequencies Ú IP 65 for outdoor applications Ú Unique design Ú Usable with all available UHF readers Ú ID ISC.ANT.U600/270: 30° Beam width, particularly suitable for Gate Applications Ú ID ISC.ANT.
DESCRIPTION ORDER DESCRIPTION The antennas of the OBID i-scan® UHF series are specially designed for use in the different UHF frequency bands. A separate version is available for the European frequency band in the range from 865 MHz to 868 MHz as well as for the FCC frequency band from 902 MHz to 928 MHz Antennas with an operating frequency from 865 MHz to 868 MHz: The circular polarization of the antenna allows an identification of transponders in different orientation. E.g.
