User's Manual

Powering on or off the device
27
Powering on or off the device
z
Ensure that the power switch is in the position before connecting to
the power supply.
z
The mains supply socket should be a standard three-prong socket and
its protective grounding terminal should be connected to the protective
grounding cable of the power supply system. If the requirements above
are not met, the device must be protectively grounded as described in
Preparing the power supply on Page 26 .
z
Ensure that the grounding cable is connected in accordance with the
relevant standard or under the guidance of the experienced electrician.
z
We recommend that you use the power cord provided by the manufacturer
to connect to the power supply, and the power cord can be only used with
this device. Failure to do so might damage the power cord or device.
Powering on the device
Perform the following steps:
1. Connect the power port of the device and the mains supply socket
by using the power cord.
2. Turn the power switch to the position.
After you power on the device, self-test begins.
Powering off the device
Perform the following steps:
1. Click and select Shut down. Select Shut down in the pop-up
dialog box.
2. Turn the power switch to the position.
Preparing materials for post wash
Material list
Prepare the following items:
z
Post-loading plate