User's Manual

Getting started
26
The following table describes indicator statuses on the label:
Table 1 Indicator status
Label Indicator status Description
Anti-shock
label
Remains
unaffected
Indicates that the device is intact
and no strong collision occurs during
transportation, or the intensity does
not exceed the limit.
Red
Indicates that the device might not
be intact and a strong collision occurs
during transportation and the intensity
exceeds the limit.
Anti-tilt
label
Remains
unaffected
Indicates that no tilt occurs, or the
gradient does not exceed the limit.
Red
Indicates that tilt occurs, and the
gradient exceeds the limit.
Preparing the power supply
Item Description
Voltage and frequency
range
100 V - 240 V
~
, 50/60 Hz
Voltage fluctuation
±
10%
Grounding resistance 4 Ω
Rated power
600 VA
The available current should be equal to or
greater than 10 A.
Transient over-voltage
category
II
Installing the device
The device can be installed only by the technical support.
To ensure that the performance of the device meets the
specifications, the technical support will perform a standard loading
before customer training and use.