User's Manual

Device overview
22
To open the settings interface, tap , and select Settings.
The following table describes the function of controls in the
interface:
Item Description
Language
Tap to change the language of the software. Restart the
device to apply the changes.
Network
Input the IP address and port number of the ZLIMS server.
Modification takes effect after you restart the software.
Customize Move the slider to change the volume of the speaker.
Maintenance interface
You can empty the fluidics line and perform self-test in this
interface.
To open the maintenance interface, tap , and select
Maintenance.
The following table describes the function of controls in the
interface:
Item Description
Self-test
Tap to perform a self-test for the hardware of the
device. The result of each item is displayed in the
interface. After self-test, you will be prompted
that the self-test is successful.
Empty fluidics line
A/B
Tap to discharge the residual liquid in its fluidics
line to the post-loading plate.
Shutdown or restart interface
You can shut down or restart the system in this interface.
To open the shut down or restart interface, tap and select Shut
down.
About interface
You can view the software version, serial number, and other
information in this interface.
To open the about interface, tap and select About.