User's Manual

OBID i-scan
®
Installation
ID ISC.ANT800/600-DA
FEIG ELECTRONIC GmbH
Page 31 of 42
M50101-2de-ID-B.doc
E N G L I S H
10.2 Constructing the antenna
The individual components are constructed as shown in Fig. 7: Antenna configuration
Fig. 7: Antenna configuration
10.3 Setting the antenna tuner
The jumpers on the ID ISC.ANT800/600-DA antennas are factory set as shown below. The
settings should be verified for each antenna.
Table 3: Jumper settings on the tuner boards
Function
Jumper
Position
1 Q-resistance
JP1
closed
2 Q-resistance
JP2
open
Antenna switch
JP3
closed
Note: See also the installation guide for the ID ISC.DAT (M40401-xde-ID-B)
X6
ANT1
X3
1,35m
Tunning board of the
antenna ID ISC.ANT800/600-DA
torrid
Long Range Reader
ID ISC.LR2500