User's Manual
Table Of Contents
- Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen
- Leistungsmerkmale des Readermoduls ID ISC.M02
- Montage und Anschluss
- Funkzulassungen
- Technische Daten
- Safety Instructions / Warning - Read before start-up !
- Performance Characteristics of the ID ISC.M02 Reader Module
- Installation and wiring
- Radio Approvals
- Technical Data
OBID
®
Installation ID ISC.M02
FEIG ELECTRONIC GmbH Page 34 of 42 M20301-0de-ID-B.doc
E N G L I S H
8.3. Display elements
The ID ISC.M02 Reader Module has a green LED (V1) and a red LED (V2) which are used as dis-
play elements (Fig. 3.3-1).
Fig. 3.3-1: Position of LEDs V1 and V2
The functions of both LEDs can be configured using software protocol. It is also possible to control
both LEDs directly using an additional software protocol.
Table 3.3-1 shows the standard setting for V1 and V2.
LED Color Standard setting
V1 Green
• Flashes 4x after a reset.
• Flashes continuously at a frequency of 2 Hz.
V2 Red
• Flashes 4x after a reset.
• Comes on for 1 second after successful
communication with a transponder.
Table 3.3-1: Standard setting for the LEDs
X1
J1
V2
V1
X4