IDENTIFICATION USER GUIDE ID HyWEAR compact Hands-Free UHF RFID & Barcode Scan System H90210-2e-ID-B
IDENTIFICATION ID HyWEAR compact Note Note Note © Copyright by FEIG ELECTRONIC GmbH Lange Strass 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de http://www.panmobil.com info@panmobil.com With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority.
IDENTIFICATION ID HyWEAR compact General Information General Information Regarding this Document General Information Aim and Target Audience This document is intended for users (e.g. in logistics and assembly) of the ID HyWEAR compact. It contains step-by-step instructions that explain the basic functions to make working with the ID HyWEAR compact as easy as possible. No prior experience is required.
IDENTIFICATION ID HyWEAR compact Contents Contents Contents 1 Safety Instructions 8 2 Revision History of Documentation 9 3 Introduction 3.1 The ID HyWEAR compact................................................................................................ 10 3.2 Applications ..................................................................................................................... 10 4 Scope of Delivery 11 5 Product Description 12 5.1 Product Illustration ................
IDENTIFICATION ID HyWEAR compact Contents 9.1 LEDs ................................................................................................................................. 18 9.2 Buzzer .............................................................................................................................. 18 9.3 Vibration Feedback ......................................................................................................... 18 9.4 Trigger Button...........................
IDENTIFICATION 11.4 11.5 11.6 ID HyWEAR compact Contents 11.3.1 Scan-Time RFID ............................................................................................... 27 11.3.2 Scan-Time Barcode .......................................................................................... 27 11.3.3 Scan Engine ..................................................................................................... 27 11.3.4 Scan Interface ........................................................
IDENTIFICATION 11.6.2 11.7 ID HyWEAR compact Contents Vibration Feedback Signalization ...................................................................... 34 Button Settings ................................................................................................................ 35 11.7.1 Unlock Trigger Button ....................................................................................... 35 11.7.2 Left Button Power-Off ..............................................................
IDENTIFICATION ID HyWEAR compact 1 Safety Instructions 1 Safety Instructions Safety Instructions ► ► ► ► ► ► ► ► ► ► Please read this user guide carefully and follow the given instructions and safety instructions before using the device. The device may only be used for the intended purpose designed by the manufacturer. This user guide should be conveniently kept available at all times for each user.
ID HyWEAR compact IDENTIFICATION 2 Revision History 2 Revision History of Documentation Revision History Revision Date 2 20.09.2019 Approval for Canada (IC) removed 1 04.09.2019 FCC and IC approval notice supplemented Illustration added to “Intended Use” 0 08.02.
IDENTIFICATION ID HyWEAR compact 3 Introduction 3 Introduction Introduction 3.1 The ID HyWEAR compact The ID HyWEAR compact is the combination of a small RFID- and barcode scanner and a comfortable, ergonomic fingerless glove that allows fingers, hand and arm to move freely. The ID HyWEAR compact is easy to use with and without gloves and the exchangeable high-capacity rechargeable battery allows long use. It is equipped with the latest wireless technology (Bluetooth, WiFi 2.
ID HyWEAR compact IDENTIFICATION 4 Scope of Delivery 4 Scope of Delivery Scope of Delivery The scope of delivery includes following components: 1 x ID HyWEAR compact fingerless glove 1 x ID HyWEAR compact scanner unit (incl.
ID HyWEAR compact IDENTIFICATION 5 Product Description 5 Product Description Product Description 5.1 Product Illustration Fig. 1: Product illustration – scanner unit Fig.
IDENTIFICATION 5.2 ID HyWEAR compact 5 Product Description Intended Use The ID HyWEAR compact is designed to read 1D and 2D barcodes as well as RFID tags in the frequency bands 865 MHz to 868 MHz (EU version) and 902 MHz to 928 MHz (FCC version). Fig.
ID HyWEAR compact IDENTIFICATION 5 Product Description 5.3 Approvals 5.3.1 Europe (CE) This equipment is intended to be commercialized in all the countries of the European Union and there is no commercialization or operational restrictions in any of the countries. Hereby, FEIG ELECTRONIC GmbH declares that this Bluetooth, Wi-Fi barcode scanner is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
IDENTIFICATION ID HyWEAR compact 6 Technical Data 6 Technical Data Technical Data Mechanical Data Housing Robust ABS Dimension (W x H x D) 60 mm x 50 mm x 23 mm (2.36“ x 1.97“ x 0.
IDENTIFICATION ID HyWEAR compact 7 Components 7 Components Components 7.1 Electrical 7.1.1 Battery The rechargeable battery for the ID HyWEAR compact is a LiPo battery.
IDENTIFICATION ID HyWEAR compact 8 Assembly 8 Assembly Assembly 1. Slide the battery into the fixture on the underside of the scanner unit until it is fixed by the clip. 2. Slide the scanner unit into the designated pocket on the top of the fingerless glove and connect the electronics using the two snaps. Ensure that the scanner unit is firmly attached to the glove. 3. Close the lug with the Velcro strip to secure the scanner unit in place.
IDENTIFICATION ID HyWEAR compact 9 Operating Elements 9 Operating Elements Operating Elements 9.1 LEDs The ID HyWEAR compact is equipped with five LEDs (see chapter 5.1 Product Illustration on page 12.). The charging status LED indicates if the ID HyWEAR compact is charged via a USB connection. No USB Connection (Default) Action LED 9.
IDENTIFICATION ID HyWEAR compact 10 Operation 10 Operation Operation The instructions given in this user guide are based on the settings defined ex works. It is possible to configure own settings, therefore see chapter 10.5 Configuration on page 23. 10.1 Charging the Battery Before initial operation, the battery should be fully charged. This can be done either via the supplied USB-C cable or via the ID HyWEAR Charging Station.
IDENTIFICATION ID HyWEAR compact 10 Operation Fig. 4: Charging via ID HyWEAR Charging Station The ID HyWEAR Charging Station has a power LED and a charging LED for each slot that indicates the charging state of the inserted battery. For the different statuses of the LED, see the table below. State Description Power LED off The charging station is not supplied with power. Power LED blue The charging station is supplied with power. Charging LED off No battery inserted in the battery charging slot.
IDENTIFICATION ID HyWEAR compact 10 Operation 10.1.2 Charging via USB-C To charge the ID HyWEAR compact via USB-C, connect it to a PC or laptop using the supplied USB-C cable. With a suitable adapter, you can also charge the device via a power outlet using the USB-C cable. Fig. 5: Charging via USB-C 10.2 Powering Up the ID HyWEAR compact To power up the ID HyWEAR compact, press and hold one of the three buttons for 2 seconds.
IDENTIFICATION ID HyWEAR compact 10 Operation 10.3 Connecting to Host The flashing blue LED after power-up means that the ID HyWEAR compact is seeking a connection. As long as no connection to the host has been established, scanning is not possible. 10.3.1 Establishing a WiFi Connection To connect the ID HyWEAR compact to a host via WiFi an access point is needed. Make sure that both devices, ID HyWEAR compact and the WiFi access point, have the same settings.
IDENTIFICATION ID HyWEAR compact 10 Operation 10.4 Scanning To scan a barcode or an RFID tag, aim at the target and press the trigger button. You can configure the scan engine via “HyWEAR Config Tool”. After pressing the trigger button, the ID HyWEAR compact tries to read a barcode or an RFID tag for 3 seconds. During this time, the yellow LED is lighting up constantly. If the scan was successful, the green LED lights up. In case of an unsuccessful scan, the red LED lights up. 10.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11 Configuration Parameters Configuration Parameters Via the configuration parameters, various settings can be made, e.g. assigning a device ID, selecting different scan settings or options for the connection to the host. To configure the ID HyWEAR compact the software “HyWEAR Config Tool” is required, which can be obtained from the FEIG ELECTRONIC download area. Please use the login data, which you can find in the manual. 11.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.2 RFID Settings 11.2.1 Regulation Logical Name AirInterface.Region.UHF.Regulation Description Defines the region specific behavior according to the RF regulations. For a detailed description of the individual countries' affiliation to the regions and their frequency bands. The region is set up ex factory. Changing the region from EU to FCC and vice versa is only possible with an activation code.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.2.4 TR-Response-Time Logical Name AirInterface.TimeLimit Description Defines the maximum duration for the transponder command. It starts after the reader has received a new command. At the latest after the TR-RESPONSE-TIME has elapsed the reader will send an answer protocol. In this case, current commands between reader and transponder are aborted. If the time is too short the status "0x83 RF Communication Error" will appear.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.3 Scan Settings 11.3.1 Scan-Time RFID Logical Name AirInterface.ScanTime Description Defines the timespan the reader scans for an RFID tag. Possible Values Default Value Unit Reset Required 1...65535 5 * 10 ms Soft 11.3.2 Scan-Time Barcode Logical Name Barcode.ScanTime Description Defines the timespan the reader scans for a barcode. Possible Values Default Value Unit Reset Required 1...255 30 * 100 ms Soft 11.3.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.3.5 IDD Logical Name OperatingMode.ScanMode.DataSelector.IDD Description This configuration flag defines if RFID or barcode data will be part of the scan event data. The max. length for barcode is limited to 200 bytes by the buffer. Possible Values Default Value Unit Reset Required b0: IDD disabled b1: IDD enabled b1 - Soft 11.3.6 Input Events Logical Name OperatingMode.ScanMode.DataSelector.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.4 Bluetooth Settings 11.4.1 Bluetooth Destination Address Logical Name HostInterface.Bluetooth.DestinationAddress Description Defines the Bluetooth destination address to which the connection is to be established. The Bluetooth destination address may only consist of the following hexadecimal characters: 0-9, A-F Example: 12:34:56:78:9A:BC Possible Values Default Value Unit Reset Required - Hard 11.4.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.5 WiFi Settings 11.5.1 Frequency Band Logical Name HostInterface.WLAN.FrequencyBand Description Defines the frequency band used. Possible Values Default Value Unit Reset Required 0x00: 2.4 GHz 0x01: 5 GHz 0x02: 2.4 and 5 GHz (Dual Band) 0x00 - Hard 11.5.2 DHCP Logical Name HostInterface.WLAN.IPv4.Enable_DHCP Description Enables or disables DHCP for WiFi connection. If DHCP is disabled, a static IP address is used.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.5.5 Subnet Mask Logical Name HostInterface.WLAN.IPv4.SubnetMask Description Defines the subnet mask for WiFi connection. Possible Values Default Value Unit Reset Required 255.255.255.0 - Hard Default Value Unit Reset Required 0.0.0.0 - Hard Default Value Unit Reset Required 0.0.0.0 - Hard Default Value Unit Reset Required 0.0.0.0 - Hard 11.5.6 Gateway Address Logical Name HostInterface.WLAN.IPv4.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.5.10 WPA2 Key Logical Name HostInterface.WLAN.Security.WPA2.Key Description Defines the pre-shared key for WPA2. The key can have a maximum length of 61 bytes and may only consist of printable ASCII characters: !"#$%&'()*+,-./0123456789:;<=>? @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ `abcdefghijklmnopqrstuvwxyz{|}~ Possible Values Default Value Unit Reset Required - Hard 11.5.11 EAP Method Logical Name HostInterface.WLAN.Security.EAP.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.5.14 EAP Password Logical Name HostInterface.WLAN.Security.EAP.UserPassword Description Defines the user password for EAP (Extensible Authentication Protocol). The password can have a maximum length of 16 bytes and may only consist of printable ASCII characters: !"#$%&'()*+,-./0123456789:;<=>? @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ `abcdefghijklmnopqrstuvwxyz{|}~ Possible Values Default Value Unit Reset Required - Hard 11.5.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.5.18 Hostname Logical Name OperatingMode.ScanMode.Transmission.Destination.IPv4.Hostname Description Defines the destination address of the host by name. The hostname can have a maximum length of 52 bytes and may only consist of the following printable ASCII characters: -0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz Possible Values Default Value Unit Reset Required - Hard 11.5.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.7 Button Settings 11.7.1 Unlock Trigger Button Logical Name DigitalIO.Button.Trigger.Enable_UnlockTrigger Description Defines if the scan function can be unlocked by pressing the trigger button. After unlocking, a new scan can be started. NOTE: The scan function can be locked by the host after a scan event.
IDENTIFICATION ID HyWEAR compact 11 Configuration Parameters 11.7.5 Right Button Function Logical Name DigitalIO.Button.Right.Function Description Defines the function assignment for the right button. 0x00: The button has no function. 0x01: Unlocks the scan function 0x04: Starts a new scan. In Continuous Read Mode it also stops a scan. 0x20: Toggles the trigger mode between Single Read Mode and Continuous Read Mode.
ID HyWEAR compact IDENTIFICATION 12 Troubleshooting 12 Troubleshooting Troubleshooting Problem I cannot connect the device via USB. Solution Ensure that the connection cable is plugged in properly. Ensure that the correct driver for the USB controller is installed. The red LED flashes after successful reading of a barcode or an RFID tag. The connection between the device and the host has timed out. Check the connection. The red LED lights up after trying to read a barcode or an RFID tag.
IDENTIFICATION ID HyWEAR compact 13 Maintenance and Cleaning 13 Maintenance and Cleaning Maintenance and Cleaning 13.1 Cleaning the Lense To clean the lense use a clean and dry cleaning cloth. Do not use chemical cleaners, lyes or similar. 13.2 Contacts To clean the contacts use a clean and dry cleaning cloth. Do not use chemical cleaners, lyes or similar. 13.3 Fingerless Glove and Battery The fingerless glove and the battery are consumables and therefore wear parts.
IDENTIFICATION ID HyWEAR compact 14 Decommissioning 14 Decommissioning Decommissioning For prolonged decommissioning, disconnect the scanner unit from the fingerless glove and slide the scanner unit out of the pocket. Then remove the battery. Make sure to store the device dry and clean. The storage temperature should be between –25 °C and 85 °C.
IDENTIFICATION ID HyWEAR compact 15 Disposal 15 Disposal Disposal Never dispose of LiPo batteries in household waste! LiPo batteries can be disposed of at special collection points. Before disposal, make sure that the LiPo battery is completely discharged.
IDENTIFICATION ID HyWEAR compact 16 Warranty 16 Warranty Warranty FEIG ELECTRONIC warrants that the product will be free of defects in material and workmanship for 12 months from the date of shipment when used as intended. Battery and fingerless glove are not covered. FEIG ELECTRONIC will, at its option, either repair or replace the defective products. Such repair or replacement shall be buyer’s sole remedy in the event of manufacturer’s breach of his limited warranty.
