Users Manual Part 2

Sequencing
40
Workflow
Automatic post-wash
Review parameters
Load the reagent cartridges and flow cell
Log in
Perform a sequencing run
Select a flow cell stage
ABCD
z
Chemicals in reagents and waste might cause personal injury through
contact with the skin, eyes, and mucosa. Follow the safety standards of
your laboratory and wear protective equipment (such as laboratory coat,
and disposable bouffant cap, protective glasses, mask, gloves, and shoe
covers) when performing a sequencing run.
z
When the waste reaches the specified limit before or during sequencing,
dispose of the waste according to local regulations and your laboratory
safety standards. Wear protective equipment (such as laboratory coat, and
disposable bouffant cap, protective glasses, mask, gloves, and shoe covers)
when handling the waste. Personal injury might be caused by contact with
the skin, eyes, and mucosa.
Logging in
You can perform the sequencing and wash procedures only after you log in
to the control software.
Perform the following steps:
1. Power on the device.
2. Log in to the computer with the password that are provided by the
manufacturer.
3. Tap in the main interface.