Installation Instruction

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 19 of 24
cVEND plug - User manual.docx
5.
Technical Data
flex
reader
Housing
 plug front with contactless symbol (visible dome: PC; plane:
Silicon)


Dimensions over all (W x H x D)
Dimensions visible
 79 x 70 x 37 mm
  28.5 mm


Wight
 85 g


Temperature Range
Operating
Storage
 -25 °C to +70 °C ambient temperature
 -25 °C to +80 °C


Humidity
 95 % max, (no condensing)

Power Supply
 5,0 to 5,5 V DC (Ripple < 80 mVpp)


Power Consumption Operation
 typ. < 1 A, peripherals excluded


Standby Mode
 < 20 mA, Full operation after wake-up  1 Sec
 Wakeup by Card and digital input


RFID Interface
 Integrated Antenna
 13,56 MHz
 ISO/IEC 14443-A / -B (NFC reader/writer mode) in EMVCo
contactless mode
 JIS X 6319-4 (Sony Felica) transparent communication channel
 NFC IP1 (P2P) and NFC card emulation mode hardware
enabled


Supported Transponder
 ISO/IEC 14443-4 compliant smart cards, NFC Type 1, 2 and 4
in card emulation mode, mifare classic, mifare ultralight and fur-
ther technologies on request


Peripheral Interfaces
 Ethernet - IEEE 802.3/Ethernet, 10/100 Mbps


 RS232 (V.24)


 RS232-LVTTL, incl. CTS, RTS signals


 USB 2.0 Host hardware enabled

 USB 2.0 Device


 SPI hardware enabled

 I2C 100/400 kHz hardware enabled

 24-Bit RGB-bus interface for external TFT displays hardware
enabled

User Interface
 6 LED (4 green, 1 red, 1 yellow), Buzzer,
illuminated Payment Logo


CPU and Security
 ARM 9 CPU (384 MHz) – Tamper Protected and Side Channel
Attack Resistant with Real Time Memory Encryption
 Cryptographic Hardware Acceleration supports
SHA, DES, AES
 True Random Number Generator
 RAM MByte 128 / FLASH MByte 256
 Real Time Clock – Battery backed


Battery
 3V Lithium Battery, 540 mAh, Lifetime 10 year at 25 °C
1


1
Battery is needed for security function and RTC. Higher temperature will reduced lifetime!