User's Manual

OBID
®
classic-pro Installation ID CPR.M02/ANT19
FEIG ELECTRONIC GmbH Page 21 of 20 Manual-M21001-3de-ID-B.doc
5. Technical Data
• Dimensions ( W x H x D )
50 mm x 50 mm x 14 mm
• Connector
10 pol. Pin-Connector (grid dim. 2,54 mm)
• Supply voltage
5 V DC ± 5% ripple
0...250 kHz < 10 mVpp
ab 250 kHz < 0,1 mVpp
• Power Consumption
max. 1,5 W
• Operating Frequency
13.56 MHz
• RF Transmitting Power 250 mW ± 2 dB
• Antenna: ID CPR.M02.VP/AB-CA
External (separate 2 pol. Pin-Connector)
• RS232-TTL Interface:
ID CPR.M02.VP/AB-C / -CA
4.800 to 230.400 Baud
• Daten-/Takt Interface
• Magnet Stripe Emulation
• Wiegand Emulation
• EEPROM (for parameters)
1 kB (10,000 write cycles)
• FLASH
64 kB (software update on interface possible)
• Supported Transponders
read and write
• ISO14443-A compatible
(e. g. mifare, mifare Ultra Light, my-d proximity)
• ISO14443-B compatible
• ISO15693 compatible
(e. g. I•Code SLI, Tag-It HFI, my-d vicinity, STM
LRI512)
• I•Code 1 (optional)
• Security Function (optional)
SAM (Security Access Module),
e.g. for my-d vicinity and my-d proximity
• Optical Indicators
LED green: running;
LED red: Transponder detected
• Temperature Range
Operating
Storage
-20°C to +70°C
-40°C to +85°C
• Radio Approval
Europe
USA
EN 300 330
FCC 47 CFR Part 15
• EMC
EN 301 489
• Safety
EN 60950