User's Manual

OBID

classic-pro Installation ID CPR.M02/ANT19

FEIG ELECTRONIC GmbH Page 14 of 20 Manual-M21001-3de-ID-B.doc

3.3. Display elements

The ID CPR.M02 Reader Module has a green LED (V1) and a red LED (V2) which are used as

display elements (Fig. 3.3-1).

Fig. 3.3-1: Position of LEDs V1 and V2

LED Color Standard setting

V1 Green

• Flashes 4x after a reset.

• Flashes continuously at a frequency of

2 Hz.

V2 Red

• Flashes 4x after a reset.

• Comes on for 1 second after successful

communication with a transponder.

Table 3.3-1: Standard setting for the LEDs

NOTE:

Up from Firmware-Version 1.08 the function of the red LED is connected to X1, Pin7 (CLS).

For current limitation an additional resistor with 470

Ω

is required.

V2V1