User Manual

OBID
®
classic-pro Installation ID CPR74
FEIG ELECTRONIC GmbH Page 5 of 20
CPR74-Manual M60610-
0e.docx
2. Characterization ID CPR74
The reader modules ID CPR74 are designed for data exchange (read and write) with passive tran-
sponder according ISO14443 type A and type B, ISO15693, ISO18000-3M3 and are capable for
communication with NFC devices (ISO18092). The small dimensions and the different available
interfaces (RS232-TTL or USB) make it suitable for an easy integration into terminals, housings
and other devices.
The following different types of reader modules are available:
ID CPR74-4SCUSB ID CPR74-CUSB
Dimensions L x B x H 50 mm x 68 mm x 10 mm 50 mm x 68 mm x 8 mm
Power supply 5 V DC ± 5 %
Antenna:
internal
external




SAM Socket 4 -
Digital outputs 3
Interface
 RS232-TTL

 USB full-speed (12Mbit/s)

The variant ID CPR74-4SCUSB is equipped with 4 sockets for Security Access Modules (SAM) in
the ID000 format. Because of the SAM current consumption the reader module is designed as
Self-Powered-Device and need a separate power supply. The voltage supply from a USB port is
not sufficient in this case.
Because of their high performance and a wide range of different configuration parameters the
reader modules ID CPR74 is suitable for a lot of applications like eTicketing, ePayment,
eDocument, eMobility and medical devices.
With the help of the integrated antenna multiplexer an external antenna can be used additional to
the internal antenna. In Scan Mode the reader can switch between both antenna automatically.
The implemented SoftCrypto and SAMCrypto high level functions offer a comfortable and fast in-
terface for the access to the encrypted data of an mifare Desfire, mifare Plus or mifare Ultralight
transponder.
The reader module with a corresponding external antenna is ready for a EMVCo Contactless Level
1 certification as well as a VDV-KA certification (corresponding to BSI TR-03105 Part 4) or in the
future CEN/TS 16794 approval.
The certification suitability need to be evaluate for each individual case because of the used ex-
ternal antenna and the installation situation.
The SAM Sockets have been approved according the EMVCo Contact Level 1 and they are eligi-
ble for the certification.