User Manual

OBID
®
classic-pro Installation ID CPR74
FEIG ELECTRONIC GmbH Page 14 of 20
CPR74-Manual M60610-
0e.docx
6. Indicators / LEDs
The reader modules has two LED indicators on board (green and red)
After power on or after a CPU Reset both LED’s starts blinking synchronously for about 2s.
While operation the LED’s signalizes the following operating status:
LED - green
flashes:
Reader is ready for operation but has no host communication
shine:
Polling-Mode:
Reader is ready for work and has communication with the host.
Scan-Mode:
Reader is working in Scan-Mode.
LED - rot
Communication with the Transponder (Tag detect).
Figure 8 shows the position of the green and red LED.
Figure 8: Position of the green and red LED