User Manual

OBID
®
classic-pro Installation ID CPR74
FEIG ELECTRONIC GmbH Page 12 of 20
CPR74-Manual M60610-
0e.docx
4.4.1. Installation of a SAM Card in a SAM Socket
The following step by step instruction shows the installation of a SAM Card into the SAM socket
S1.
1. Closed SAM socket without SAM card. 2. Push the latch to the right side and open the
cover carefully.
3. Put the SAM card into the cover. The contact
plate face up and the beveled corner outside
4. The SAM card must be pushed up against
the stop angle.
5. The SAM card must not be inserted with the
beveled corner first.
6. Close the top cover with carefully pressure to
snap into place. Push the latch to the left side.