User's Manual

OBID
®
classic-pro Installation ID CPR44
FEIG ELECTRONIC GmbH Page 16 of 16 ID CPR44 User Manual-
01.doc
5. Technical Data
Weight
approx 20 g
Antenna
 Internal (48 mm x 58 mm)
Temperature Range Operating
Storage
-25°C to +70°C
-40°C to +85°C
Humidity
0 to 95 % not condensing
Power Supply
 5 V DC  5 % Ripple:
0...250 kHz < 10 mVpp
up from 250 kHz < 0,1 mVpp
Current consumption
typ. 300 mA
1
RF Interface
ISO14443-A & ISO14443-B (Part 4 fully supported)
106, 212, 424, 847 kbit/s
Supported Transponder
(reading and writing)
mifare classic, mifare Ultralight, mifare Ultralight C,
mifare DESfire, mifare PLUS, Smart MX, my-d proxim-
ity, SLE44R35S, SLE55R, Jewel, SLE66CL,
ST19XR34, SRI4K, SRIX4K, SRI512, SR176, RF360,
etc.
NFC Type 1, 2 and Type 4 in card emulation mode
Operating Frequency
13.56 MHz
RF Transmitting Power
400 mW  2 dB
Host-Interface
 USB Full-Speed (12 Mbit/s)
Self-Powered Device
 RS232-TTL (4.800 to 230.400 Baud)
Digital Output
3 (I
out high
max.: 5 mA / I
out low
max.: 8 mA)
Connector
VCC, RS232TTL, Digital Outputs:
USB:
 JST PH 7pin. (X1)
 JST PH 5pin. (X2)
Contact Interface (ISO7816)
(only types with SAM)
4 * SAM Socked for ID000 Format (SIM-Card)
9600 to 375.000 bit/s
T=0 and T=1 Protocol
for 1,8 V; 3 V; 5 V Smartcards
MTBF
500.000 h
1
Current consumption of SAMs excluded