INSTALLATION ID CPR44 ISO14443-A and -B RFID Reader final - public (B) ID CPR44 User Manual-01.
OBID® classic-pro Installation ID CPR44 Note Copyright 2010 - 2012 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited.
OBID® classic-pro Installation ID CPR44 Contents 1. Safety Instructions / Warning - Read before start-up ! 4 2. Characterization ID CPR44.0x-xx 5 3. Installation and wiring 6 3.1. Dimensions ...........................................................................................................................6 3.2. Connection X1, X2 - Vcc and Interface ...............................................................................7 3.3. Digital Outputs...........................................
OBID® classic-pro Installation ID CPR44 1. Safety Instructions / Warning - Read before start-up ! The device may only be used for the intended purpose designed by for the manufacturer. The operation manual should be conveniently kept available at all times for each user. Unauthorised changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries.
OBID® classic-pro Installation ID CPR44 2. Characterization ID CPR44 The reader modules ID CPR44 are designed for data exchange (read and write) with passive transponder according ISO14443 type A and type B and are capable for communication with NFC devices (ISO18092) and supports the mifare classic security functions. The small dimensions and the different available interfaces (RS232-TTL or USB) makes it suitable for an easy integration into terminals, housings and other devices.
OBID® classic-pro Installation ID CPR44 3. Installation and wiring 7,5 3.1. Dimensions 7,2 J1 X6 ANT 1 14 X2 X1 19,2 18 50 44 24,8 1 ,5 R1 7,4 3 * 44 60 Fig. 2 Top view Fig. 1 Side view (* only types with SAM) Fig. 3 Button view. Types with SAM FEIG ELECTRONIC GmbH Page 6 of 16 ID CPR44 User Manual01.
OBID® classic-pro Installation ID CPR44 3.2. Connection X1, X2 - Vcc and Interface The reader can be connected to a RS232-TTL interface and the power supply by using the multipin connector X1. The multi-pin connector X2 provide the connection for the USB interface. The device is a self-powered USB device which requires a separate power supply. The following figure 5 and the table shows the assignment of the pins X1 (7pol.) and X2 (5pol.) Typ “JST PH” RM 2 mm (horizontal). Fig. 4 Plug „JST PH“ Fig.
OBID® classic-pro Installation ID CPR44 NOTICE: The reader has to supplied by a limited power supply (e.g. NEC Class 2/LPS power supply) according IEC EN 60950, only Use only regulated power supply’s. The connection cable (RS232TTL, USB, VCC) should be as short as possible and must be shorter than 3 m. Reversing the polarity of the supply voltage may destroy the device. Supply voltages outside the specifications may destroy the device.
OBID® classic-pro Installation ID CPR44 3.4. SAM Module Fig. 8 shows the position of the 2 SAM connector (double stacked) X4 and X5. Each SAM connector is designed for two ID000 formatted (SIM Karte) SAM modules. NOTICE The SAM connectors are designed only for occasional opening and closing cycles. Wrong inserted SAM modules and forcefully opening or closing will damage the SAM connectors. Socket Position SAM Number top 3 button 1 top 4 button 2 X4 X5 Fig.
OBID® classic-pro Installation ID CPR44 3.4.1. Installation of a SAM Card The following step by step instruction shows the installation of the SAM Card 1 and 3 into the SAM connector X4. The installation of the SAM Cards 2 and 4 in the socket X5 must be done in the same way. 1. Unlatch the top cover at the front edge. 2. Push the cover of lower slot backwards and open it 3. Put the SAM module 1 into the cover of the lower slot. The contact plate face down 4.
OBID® classic-pro FEIG ELECTRONIC GmbH Installation Page 11 of 16 ID CPR44 ID CPR44 User Manual01.
OBID® classic-pro Installation ID CPR44 3.5. Installation notes Be aware of the following possible environmental factors when installing an ID CPR44into another device : Effects from nearby metal objects Detuning of the integrated antenna Impaired communication of the antenna’s magnetic field EMC effects on cables Impaired communication between reader and transponder EMC effects from magnetic fields Impaired communication between reader and transponder 3.5.1.
OBID® classic-pro Installation ID CPR44 3.5.3. EMC effects from magnetic fields The communication principle of RFID- Technology is based on the modulation of electromagnetic fields. Alternating magnetic fields in the vicinity of the antenna can have a negative influence on the reader function. Sources of such magnetic interference fields include coils within a primary or secondary switching power supply.
OBID® classic-pro Installation ID CPR44 4. Radio Approvals 4.1. Europe (CE) When used according to regulation, this radio equipment conforms with the basic requirements of Article 3 and the other relevant provisions of the R&TTE Guideline 1999/EC dated March 99. Equipment Classification according ETSI EN 300 330: Class 2 FEIG ELECTRONIC GmbH Page 14 of 16 ID CPR44 User Manual01.
OBID® classic-pro Installation ID CPR44 4.2. USA (FCC) and Canada (IC) Product name: ID CPR44 FCC ID: PJMCPR44 IC: Notice for USA and Canada 6633A-CPR44 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
OBID® classic-pro Installation ID CPR44 5. Technical Data Weight approx 20 g Antenna Temperature Range Internal (48 mm x 58 mm) Operating -25°C to +70°C Storage -40°C to +85°C Humidity 0 to 95 % not condensing Power Supply 5 V DC 5 % Ripple: 0...250 kHz < 10 mVpp up from 250 kHz < 0,1 mVpp Current consumption typ.
OBID® classic-pro USB Driver Installation ID CPR44 PC/SC Driver for Windows Native OBID® USB Driver for Windows Windows® CE for different platforms on request Operating Modes Polling-Mode EEPROM (for Parameter) 1 * 106 write cycles FLASH (for Firmware) (Firmware update in Application possible) Radio Approval Europe EN 300 330 USA FCC 47 CFR Part 15 Canada IC RSS-Gen, RSS-210 EMC EN 301 489 Safety and Health EN 60950 EN 50364 Waste and Hazardous Substances WEEE - 2002/96/EC RoHS -
