User's Manual

OBID
®
classic-pro Installation ID CPR.03-VP/AB-A
FEIG ELECTRONIC GmbH
Page 5 of 11
3 Technical Specifications
Housing Plastic ABS (sealed-in electronics)
Color gray - beige
Weight approx. 170 g
Protection class IP 65
Power Supply 9 - 15 V DC
Power Consumption max. 2,6 W
Temperature range Operating
Storage
-25 °C to +60 °C
-40 °C to +85 °C
Relative humidity 95% (not condensing)
Antenna internal
Operating Frequency 13,56 MHz
Transmitting power
200 mW ± 2 dB
Supported Transponder
(read UID)
• ISO14443A:
e.g. mifare
®
Standard, mifare
®
UltraLight, mifare
®
DESfire,
Smart MX, my-d
®
proximity, SLE44R35S, SLE55R.., etc.
• ISO14443B:
e.g. SLE66CL, ST19XR34, etc.
• ISO15693:
e. g. my-d vicinity, I•Code SLI, TagIT HFI, STM LRI512, etc.
Connecting cable 50 cm, LiYY 12 * 0,23 mm
2
/ AWG24
Signal Transmitter 1 x LED red
1 x LED green
1 x Beeper
Digital Inputs 1 x switches LED red
1 x switches LED green
1 x switches Beeper
1 x Hold Function
Interface 1. Data/Clock Emulation:
- Magnetic Stripe (ISO7811-2, 5 Bit)
- Wiegand
2. RS232-TTL (for Service only)
Flash In-circuit firmware update possible
Applicable Standards:
• RF approval
- Europe
- USA
• EMC
• Safety
- Low Voltage
- Human Exposure
EN 300 330
FCC 47 CFR Part 15
EN 301 489
EN 60950
EN 50364