User's Manual

OBID
®
classic-pro Installation ID CPR.03-VP/AB-A
FEIG ELECTRONIC GmbH
Page 11 of 11
5.2 Data-/Clock Interface
Depending on the reader configuration the hexadecimal coded UID (max. 10 byte) of the Trans-
ponder could be transmitted in different formats via data-/clock interface.
Details are described in ID CPR.03-VP/AB-A Manual (Document No: H60100-#e-ID-B)
5.3 Asynchronous Interface: RS232-TTL
The RS232-TTL Interface is designed only for firmware update. The firmware is stored in a flash
chip. The firmware is updated via the serial RS232 (TTL) reader port.
The red and green LED is active during the firmware update process.
The firmware update is described in ID CPR.03-VP/AB-A Manual (Document No: H60100-#e-ID-B)
6 System Delivery Contents
1 x housing base including sealed-in electronics
1 x housing cover
1 x accessory bag (2 screws
3,2x 25 mm)
1 x Mounting Instruction