Installation Manual

OBID i-scan
®
Installation ID ISC.ANT1300/680-A
FEIG ELECTRONIC GmbH Page 30 of 50 M71104-1e-ID-B.doc
4.3.6 Jumper Configuration
Jumpers JP1 to JP8 must be set according to the following table.
Table 6: Configuration JP1-8
Jumper Position
In addition, close jumpers JP11 to JP18.
4.3.7 Setting the Antenna Tuner
To check the settings of the antenna tuner the antenna foot has to be opened. For that you must
remove the to fastening screws (hexagon socket width A/F2,5) of the antenna foot cover and
remove it upwards. Fig. 10
Step 1 Step 2
Fig. 15: Opening of the antenna foot