Installation Manual

OBID i-scan

Installation ID ISC.ANT1300/680-A

FEIG ELECTRONIC GmbH Page 28 of 50 M71104-1e-ID-B.doc

4.3.3 Configuration of a Gate antenna with Multiplexer

Connect the components as shown in Fig. 12.

Fig. 12: Connecting the components for a gate consisting of Type A with multiplexer

The coax cables have fixed lengths and may not be shortened and therefore need to be tied into

small loops (see Fig. 13:Tying the cables). Tie all cables as far away from the antenna conductor

as possible. The cables must never be allowed to contact the aluminum tube.

Fig. 13:Tying the cables

DC Power supply

24V

3,60m

2 Tuning boards of

antennas ID ISC.ANT1300/680

Multiplexer

ID ISC.ANT.MUX-A-M

Long Range Reader

ID ISC.LRM2000

1,35m

IN1

OUT1

OUT2

3,60m

Torrid core

X9, Pin1+3

Pos.8

Pos.2

Pos.1

Pos.4

Pos.3

Pos.7